Home : Products & Services : Mooring Systems : Mooring In A Box

 

Finally got a designated mooring spot, but are unsure of what mooring equipment is suitable for your vessel?

DON’T risk securing your valuable asset or risking your marine insurance policy by using a poor quality mooring system. The experienced Naval Architects at Jeyco will assess your vessel and custom design a mooring system using quality parts and equipment to ensure the security of your valuable asset.

Jeyco has an extensive range of storm mooring systems to cater for recreational and commercial vessels that come with the following:-

  • Static design analysis to ensure your vessel is suitable for the mooring we recommend
  • Certificate of conformance signed off by Jeyco engineers
  • General arrangement drawing of the supplied mooring
  • Genuine Marine Fittings, Structural buoy and High Holding Power anchors

Go to www.jeyco.com.au/products-and-services/mooring-systems/mooring-assessment for Jeyco to assess and quote on a suitable mooring system for your vessel.

All moorings are delivered pre-assembled, trial fitted and packaged in a wooden or steel box.

Download the Mooring "In A Box" Brochure (410kB)

Jeyco Stingray Anchors

 The Stingray is a proven High Holding Power mooring anchor which has been applied globally for:

  • Storm and Cyclone Moorings,
  • Aquaculture,
  • Hold Back Moorings and
  • Various other applications.

Jeyco has over 8000 Stingray Anchors deployed worldwide, with a proven track record in mooring applications. The efficient design of the Stingray means that it can achieve the same holding capacity as a traditional anchor which is 4-5 times heavier.

The Jeyco ‘Stingray’ Anchor embeds very quickly resulting in minimal ground disturbance which is a huge factor in areas that are environmentally sensitive. Traditional ship anchors can create seabed scarring, taking a long time to repair. This gives the Jeyco mooring system  an environmental "tick of approval".

For more information on the Stingray anchor go to http://www.jeyco.com.au/products-and-services/the-stingray-anchor

Buoyancy

A good mooring buoy must be highly visible, easy to connect to, and most importantly, be strong enough to handle the peak mooring loads. Many buoys on the market today are only designed to support the weight of chain and not designed for the imposed loads. Jeyco has a wide range of buoys which are designed to transfer the mooring loads from the vessel into the riser chain.

Mooring Hawsers

The right mooring hawser must have sufficient capacity to withstand the anticipated mooring loads, but also have sufficient elasticity to dampen the loads on the vessel. In waves, a stiff hawser will impose high peak loads on the vessels bollards, which could cause structural damage. Jeyco can advise on the right type of hawser for your mooring and vessel combination.
Jeyco supplies and assembles all types of berthing and mooring lines and stocks the following in 3, 8 and 12 Strand:-

  • Polypropylene
  • Akwaflex (Polyester/Polyefin blend)
  • Nylon
  • Polyester
  • HMPE Plasma (Stronger than Steel)

Jeyco can also undertake customised splicing to meet your requirements.

Go to www.jeyco.com.au/products-and-services/mooring-systems/mooring-assessment for Jeyco to assess and quote on a suitable mooring system for your vessel.

Download the Mooring "In A Box" Brochure (410kB)